Selected Fun Programs
E2-ExploreWalls (with
Treads and
Ultrasonic Sensor)
Multi-Bot will wander around the room trying to avoid walls.
E6-MagicPush4 (with
Ultrasonic Sensor rear
mounted)
Mount the Ultrasonic Sensor to Multi-Bot's rear bumper pointing
backwards, and then your hand will appear to push Multi-Bot
along with an invisible repulsive force.
E9-FindShoot (with
Treads,
Ultrasonic Sensor and
Ball Shooter Arm)
Place an empty soda can or water bottle anywhere near Multi-Bot
in any direction, in an open area of the floor, and Multi-Bot
will find the container and shoot it down by firing a ball at
it. F9-CountPress (with
Touch Sensors as wired remote)
A contest on the NXT to see how many times
you can press a touch sensor in one second. How fast can
you press? F13-DriveShoot (with
Touch Sensors remote and
Ball Shooter Arm)
A sophisticated two touch sensor remote
control that let you control Multi-Bot with the following
actions:
1. Press and hold the left button to turn left
2. Press and hold the right button to turn right
3. Press and hold both button to go forward
4. Tap the left button to back up, tap again to stop
5. Tap the right button to shoot a ball
6. Release both buttons to stop
F14-Golfer (with
Touch Sensors remote and
Golfing Arm)
A remote controlled golfing robot, with
similar driving control as F13-DriveShoot above, except that
tapping the right button will swing the golfing arm instead.
Start with the arm down and a ball on the carpet. How many
hits will it take you to get the ball into the hole or other
target that you make?
F16-Bumper2
(with
Treads and
Touch Sensors bumper)
Multi-Bot will wander around the room
bumping into things with its bumper, try to turn away from what
it hit, and keep going.
G2-SumoColor
(with
Treads,
Line Sensor, and
Sumo Pusher)
Multi-Bot will stay inside an area marked
on the floor with a black tape border, and try to push other
objects out of the area.
G3-ColorDrive
(with
Treads and
Line Sensor)
Multi-Bot will drive along a path or
course marked with blue tape or paper on the right border, green
on the left, and red at the finish line.
G7-BallTrap2
(with
Treads and
Ball Trap Sensor)
Multi-Bot will drive until it traps a
blue, green, or red ball, then it will stop and speak the color
of the ball that it found.
G9-BallHunt
(with
Treads,
Ball Trap Sensor, and
Golfing Arm)
Start with a few blue and green balls on
the carpet near Multi-Bot at different angles. Multi-Bot
will try to find the green balls and hit them with the golfing
arm, but leave the blue balls alone.
G14-ProFollow
(with
Treads and
Line Sensor)
Multi-Bot will follow a line marked with
black electrical tape on a light-colored floor, following any
straight and curved parts of the line. The program will
start with a "calibration" sequence that you use to easily
measure the sensor values that robot sees over darkest part
(center of line) and lightest part (open floor) to get the best
performance. J2-ReactionTest (with
Touch Sensors as wired remote)
A game to test your reaction time.
After getting the "GO!" signal on the screen, how fast can you
press touch sensor 1? |
